DESCRIPTION:

CHEMITO PUMP CARE is a specially formulated anionic polymer for the lubrication of concrete pumps, hoses and pipelines prior to concreting works. CHEMITO Pump Lubricant when comes in contact with water produces a greasy film which helps to lubricate the pipe walls and facilitates problem free pumping of cementitious mixes.

DOMAINS OF APPLICATION/USES:

1. One pack (200g) of CHEMITO – PUMP Lubricant is mixed with 40 Tirso water either in drum or in the hopper of the concrete pump till greasy condition is achieved.
2. Mix the solution to further 100 It’s of water for approximately 2 minutes and pump this mixture through the pump ahead of the concrete.
3. For horizontal pump line, we recommend to use a rubber ball in front of the priming solution for complete wetting of the pump line.
4. Using direct acting pump, concrete can easily be pumped up to distance of 450 m horizontally or 50 m vertically. For larger distances, relay pumping using pups in series may be adopted.

ADVANTAGES:

CHEMITO PUMP Lubricant is a cost-effective replacement for slurries made from bagged cement. It creates a thin lubricant film inside concrete pumps, hoses and pipelines and helps to reduce friction and prevent blockages. Key product benefit is:

1. Reduces friction and line pressure thereby increasing ease of pumping.
2. Lubricates tools, lessen friction and heat
3. Can be easily introduced into pumping equipment
4. Environment friendly product
5. Does not affect the concrete
6. Only small quantity required
7. Reduce risk of blockages

CHARACTERISTICS:
PHYSICAL PROPERTY: White Granular Powder
CHEMICAL BASE: Blended Anionic Polymers
CONSUMPIOM: One unit of CHEMITO PUMP Lubricant is sufficient for pumping concrete up to 70m
SAFETY STANDARDS: Non-toxic and non-Flammable, Eco-friendly
pH(25C) 10% w/w SOLUTION: 9.0±2.0
DISSOLVING TIME: >60min

PACKAGING & STORAGE:

CHEMITO SIGMA FLOW 2750 is available in the following pack:

• 200 gm
• Shelf life is 12 months from date of production if stored properly in undamaged, unopened, original sealed packaging, in dry conditions at temperatures between +5°C and +30°C

CONSUMOTION:

One pack(200g) of CHEMITO PUMP Lubricant is mixed with 40ltrs of water, depending on the diameter of the conveying pipe following length of pump line can be lubricated

• For 65 mm diameter : 70m
• For 100 mm diameter : 50m
• For 125 mm diameter : 30m